Telephone

+86 137 0311 7050

Home > News > News

How does Hot-dip Galvanizing Strengthen Steel?

Oct. 20, 2021

Small Parts Galvaniizng Plant


Hot-dip galvanizing substantially improves the long life and also toughness of steel. This is especially crucial in extremely destructive settings.

 

The Galvanizing Refine

The galvanizing procedure involves dipping the metal into a series of handling tanks, each with its own objective. Before it enters the tanks, though, the steel requires to be properly prepared.

 

Afterward, the metal is cleaned up with caustic chemicals. This gets rid of any type of pollutants on the product, such as dirt, oil, or grease. It is then rinsed and additionally treated by pickling. Pickling gets rid of mill range as well as iron oxides from the surface of the steel. It is rinsed again and afterward dipped in a flux option made of a zinc ammonium chloride solution. This gets rid of any type of extra oxides as well as creates a safety layer on the metal, making it prepared for galvanizing. Galvanizing itself involves dipping the metal right into a kettle of liquified zinc.

 

The zinc responds with the iron in the steel to develop metallurgically bonded zinc-iron intermetallic alloy layers. A layer of pure zinc is normally added on leading to a shield from damage. As soon as the covering is applied, the metal cools down and afterward is checked. This ensures a top-quality coat, devoid of bare places.

 

Corrosion Defense

Hot-dip galvanizing offers lasting deterioration defense by developing a layer of cathodic defense to the steel. Primarily, the zinc wears away instead of the steel. The zinc layer patinas slightly, producing a layer of zinc carbonate that is not water-soluble. This wears away really gradually, protecting the galvanized steel underneath it. The rust price is about 1/30th that of exposed steel in the exact same setting, according to the American Galvanizers Association.

 

Even if the surface is scraped, the zinc coating will certainly remain to secure the steel. Even if the bare steel is revealed as much as 1/4 inch in size, it will not start to rust up until all the surrounding zinc is taken in. It calls for no upkeep, further saving long-lasting expenses.

 

We are a Hot Dip Galvanizing Equipment Chinese Manufacturer, please feel free to contact us if you need them.

86 137 0311 7050 +86 137 0311 7050 hebeiannuo@163.com